Outer Limits 4x4 Board

Posted: **Thu Feb 05, 2009 2:02 pm**

I am just about to put the diff centre back into my GU patrol diff, got a new genuine gasket, just want to know if it needs gasket goo and if so what type? cheers

Posted: **Thu Feb 05, 2009 2:43 pm**

It wouldn't hirt. When i was fiting lockers i would just clean off the old gasket and use some RTV sealer or something simalar..

Posted: **Sat Feb 07, 2009 6:06 am**

Yep,I gave up using gaskets on diff centers a while ago. I just clean off the goo from last time and put a good coating on. There are no narrow oil/water galleries to consider blocking like on an engine part.

Dave

Posted: **Sat Feb 07, 2009 7:06 am**

belive it or not silcone is the go.

Posted: **Sat Feb 07, 2009 3:42 pm**

blumax is your friend

Posted: **Sun Feb 08, 2009 10:57 am**

I use some blue silicon type stuff that's meant to be for use where oil is present. Clean the old shit off, wipe it over with some brake clean so the gasket goo can adhere to the metal surfaces.

Posted: **Sun Feb 08, 2009 12:24 pm**

M8 if ya got a gasket use gasket goo if not use silicone wurth silicone is reel good never had a problem with it but there pritty much all the same.

Outer Limits 4x4 Board

Diff centre need gasket goo??

Diff centre need gasket goo??