35in rubber for a shorty 40
Posted: Sun Apr 04, 2004 4:40 pm
Ok yeah yeah I know this question has probably been asked before but;
I have what seem to be standard height springs (I asked for 2in lift) and I am running 4in long grease able shackles and it is clearing 32 / 11.5 dueler MT’s no prob. One thing I was thinking of doing was extended shackles and a 2 in body lift! Yep I know bugger is not always better but I need to clear 35in rubber. Do you think this will work? Or is their a better way?
Spring resetting is not an option as the rear shackles are vertical, and a spoa is illegal here in Qld so I can’t do that either. A whole new set up e.g. springs and shocks is not an option either because I only have $1000 to spend
BTW who sells the big lift springs for a 40 series cruiser? All I can find off the shelf are 50mm / 2in lift and that aint guna cut it! Not that I could afort it any way
for pic's have a look at my web site
I have what seem to be standard height springs (I asked for 2in lift) and I am running 4in long grease able shackles and it is clearing 32 / 11.5 dueler MT’s no prob. One thing I was thinking of doing was extended shackles and a 2 in body lift! Yep I know bugger is not always better but I need to clear 35in rubber. Do you think this will work? Or is their a better way?
Spring resetting is not an option as the rear shackles are vertical, and a spoa is illegal here in Qld so I can’t do that either. A whole new set up e.g. springs and shocks is not an option either because I only have $1000 to spend
BTW who sells the big lift springs for a 40 series cruiser? All I can find off the shelf are 50mm / 2in lift and that aint guna cut it! Not that I could afort it any way
for pic's have a look at my web site
