Page 1 of 1
WIRING UP ALERNATORS WITH EXCITER WIRE
Posted: Mon Feb 09, 2009 8:04 am
by ludacris
IT IS A FORD 302 ALTERNATOR AND IT HAS A WIRE FOR
S
AND
L
ALSO A 24 VOLT BOSCH ALTERNATOR WITH CONNECTION POINTS OF
W
D+
D-
+
AND B+
WOULD BE NICE IF SOMEONE CAN MARK WHERE EACH POINT OF CONECTION CONNECTS TOO. THANKS IN ADVANCE.
LUDACRIS
Posted: Mon Feb 09, 2009 8:20 am
by chimpboy
That will sort the Bosch one for you. Not sure on the 24V one, sorry.
Posted: Mon Feb 09, 2009 11:59 am
by ludacris
Thanks chimpboy.
LudaCris
Posted: Mon Feb 09, 2009 3:34 pm
by v8zuki
s wire is +ve constant power
L wire is the light on the dash, so it goes from the alt to the light then ignition +ve
alternator connection points
Posted: Mon Feb 09, 2009 3:44 pm
by mgundle
24V Alt
B+ is battery
D+ is Warning Light
D- Is Rectifier earth which dont worry about
W is star point which is directly off the windings of the stator generaly speaking its half the voltage of the alt.
used for running relays and taco's not for large loads.
Posted: Mon Feb 09, 2009 5:11 pm
by ludacris
I did hear of someone putting 12 volts into the W on the 24v alternator which acted as an exciter wire.
LudaCris