Outer Limits 4x4 Board

How much do i offer for a highmount winch

I know a bloke that has pulled me up a few time and said make me an offer on my winch!

As you all know when parting with cash you dont want to overshoot the mark or offend the bloke by offering not enough.

the winch hasen't been used for years and it is in the blokes way.

WHAT SHOULD I OFFER

professor wrote:WHAT SHOULD I OFFER

nothing, give me his phone #.

the number is 02 97 like hell

there a couple in the melb trading post, one was $650 the other $900. So if it is in good nick then guess somewhere around 900, if not less. But then again whats it worth to you.

B a tight arse offer him $500 and see how ya go

just dont be rude when you offer

u can always go up mate and hey if he needs it outada way $500 is 500

i paid 1500 for mine and it had been used 5 times and the fella had paid $2,800 for it!!

but i guess if it was an older one and it is in his way i would offer around 650 to 700 and see what happens..

I`d paid $450 mine

if he`s pulled you up to make an offer just offer him somthing stupid he might say yes.

I paid $350 for mine a couple of years ago and it has sat in the shed since. I didnt need it it was just cheap. I dont even know if it works.

considering new price is over $2k, Id offer $900 and masturbate lots if he accepted.

RUFF wrote:I paid $350 for mine a couple of years ago and it has sat in the shed since. I didnt need it it was just cheap. I dont even know if it works.

dont you have one on the lux?

dont wanna part with this one do ya?

antt wrote:

RUFF wrote:I paid $350 for mine a couple of years ago and it has sat in the shed since. I didnt need it it was just cheap. I dont even know if it works.

dont you have one on the lux?

dont wanna part with this one do ya?

I have an XD9000i on the lux. Didnt need the extra weight of a high mount.

No i dont want to sell it.

i have a 9000 on the front and im buying this one to go on the rear (for lowering and recovering mates standard rigs)and also to keep a little weight over the rear

$300 to $600 sounds ok

I will see when i see. it may be a heap of @#$% maybe

thanks for the help

purchased highmount winch for $400 good price i thought untill i stripped the winch.
-Secondary gear of motor end is stuffed(covered in rust) found out that i have to purchase the hole top end of winch (cant just buy the gear)

-found a second problem the primary gear on the break shaft (the gear beside the cam)is missing a tooth!!!!!

got a price from local agent at a cost of $600 for these faults

Is there somwhere that i can buy direct or buy cheep part for the M8274?

pm lockee of this board, he should be able to help

CRUSHU wrote:pm lockee of this board, he should be able to help

thanks