Outer Limits 4x4 Board

hi, i am about to replace my body mount bolts, when i bought the car it came with the body blocks in it already, but it seems that the bolts used are as dodgy as they come, there have been 3 or 4 nuts that are larger than the bolt thread stacked ontop of each other acting as spacers so the bolt can tighten.

what i want to know is the length and width of bolts needed to fit perfectly, and apparently there are 2 bolts that are longer than the other 8??

cheers.

I'm pretty sure the bolts you need are 12x1.25x150mm. Not sure on the other two. Make sure you get high tensile.

Jodie (Mrs Rut Rat)

They are M10 (10mm) and the back two are M12 but I don't know the thread pitch or the lengths off the top of my head.

G'day mate you may have already got it sorted but I have one of the original body bolts out of my Troll (very certain it is) and it is a M12 127mm (5") long with 95mm long shank, add 2" and you've got correct length. Just not sure of rear 2 bolt length!
Hope this helps!

hey guys, cheerz for the help, i got 12.5 mm wide x 150mm long HT, with nyloc nuts and 20 washers, no dramas! ;-)