Page 1 of 1
75 series utes coil conversion?
Posted: Wed Feb 11, 2009 6:03 pm
by zookprojectfnq
I would like to convert my ute to coil 5 link rear and 4 link front. Just wondering if any one has done this or has photos of it done. I was thinking of using 80 series diffs and arms and welding all the mount point in? Maybe 79 series front arms and diff for front set up.
Surely someone has done this
The ute in question
Don't pick on my wiring. It has been changed and neatened up. That was just to get my lockers going one weekend
Posted: Wed Feb 11, 2009 7:58 pm
by killalux
look for VKYOOT in members section, he has just done it, there is a couple of others in there aswell
Posted: Wed Feb 11, 2009 9:32 pm
by crazy eyes
have done it to the front of mine and it works great has been done fore a couple of years now but i used a 60 diff and 78 springs and mounts so ot was easyer to blue plate. i us the ute in winch comps and drive on road it is turbo petrol auto .
Posted: Wed Feb 11, 2009 9:34 pm
by zookprojectfnq
do you have any pics on how he 78 arms are welded. Did you have to weld mount plates to the 60 diff
Posted: Wed Feb 11, 2009 9:45 pm
by pinkfloyddsotm
Posted: Wed Feb 11, 2009 9:51 pm
by zookprojectfnq
Thanks pinkfloyddsotm.
MMMMM inspiring!
Posted: Wed Feb 11, 2009 10:06 pm
by pinkfloyddsotm
use all 80 series stuff man..
Posted: Wed Feb 11, 2009 11:44 pm
by hillbilliywheelchair
[quote="pinkfloyddsotm"]use all 80 series stuff man..[/quote
just get an 80 rip of the body and ponke the 75 cab on
Posted: Thu Feb 12, 2009 7:33 am
by Dane
My mate has done this. He said if he were to do it again he would put a 75 cab on an 80 chassis.
Posted: Thu Feb 12, 2009 7:51 pm
by Z()LTAN
80 stuff on a 75s will work better though...
more work but...
Posted: Thu Feb 12, 2009 8:00 pm
by pinkfloyddsotm
lol everyone thinks putting a 75 cab on an 80 chassis is easy..