hubs
Posted: Mon Apr 05, 2004 12:13 pm
does anyone know how to grease up the hubs?
Page 1 of 1
Posted: Mon Apr 05, 2004 3:09 pm
Are you talking about the wheel bearings or the freewheeling hubs?
Posted: Mon Apr 05, 2004 3:22 pm
the hubs
Posted: Mon Apr 05, 2004 8:32 pm
Use engine oil
Bazzle
Bazzle
Posted: Tue Apr 06, 2004 9:30 am
where do i use the engine oil????
Posted: Tue Apr 06, 2004 10:07 am
what sorta vechile is it
Posted: Tue Apr 06, 2004 10:29 am
use the engine oil to lube up the lock ring (the ring that slides in the Hub)
I prefer a thin smear of a dry lubricant as it does not seem to clag up as much
I prefer a thin smear of a dry lubricant as it does not seem to clag up as much
Posted: Tue Apr 06, 2004 12:10 pm
Undo the bolts or nuts holding on the freewheeling hub.
Smear minimal grease on the splined bit.
Put 1/2 a dozen drops of oil on the back of the locking ring and the slider.
Bazzle
Smear minimal grease on the splined bit.
Put 1/2 a dozen drops of oil on the back of the locking ring and the slider.
Bazzle