Outer Limits 4x4 Board

Posted: **Fri Feb 13, 2009 8:14 pm**

I need to fit a shaft spacer to my front shaft. Would i fit it to the diff side or the t/case side? and why?

Thanks
Mike

Posted: **Fri Feb 13, 2009 10:05 pm**

I reckon Tcase end, just so there is one less thing to rub on rocks...

Posted: **Sat Feb 14, 2009 10:26 am**

i have my spacer at the diff end, but only because off the better access for the rattle gun.

Posted: **Sat Feb 14, 2009 5:06 pm**

sheps wrote:i have my spacer at the diff end, but only because off the better access for the rattle gun.

Do you rattle the bolts on?

So there is no 'correct way' just whatever you feel is best?

Mike

Posted: **Sat Feb 14, 2009 5:44 pm**

Put it on the transfer end as it will help with clearence of the cross member at droop.

Posted: **Sat Feb 14, 2009 9:39 pm**

mike_nofx wrote:
sheps wrote:i have my spacer at the diff end, but only because off the better access for the rattle gun.
Do you rattle the bolts on?

So there is no 'correct way' just whatever you feel is best?

Mike

dunno mate i just like using air tools

Outer Limits 4x4 Board

Driveshaft spacer - at diff or at t/case?

Driveshaft spacer - at diff or at t/case?