Page 1 of 1
One for all the hardcore 40series owners
Posted: Fri Feb 20, 2009 7:47 pm
by 4X4 shorty
HEY all I'm building a 47 and am after pics and insperation on building and internal cage for it Im really after pics and ideas on were other people run there
Thanks all
Posted: Sat Feb 21, 2009 11:14 am
by bj on roids
I expected more from this thread
Posted: Sat Feb 21, 2009 11:57 am
by evanstaniland
bj on roids wrote:I expected more from this thread
x2
just after info
Posted: Sat Feb 21, 2009 1:55 pm
by 4X4 shorty
yeah oh well it got your attention and hopfully get someones attiention who has some usfull info hey
Posted: Sat Feb 21, 2009 3:43 pm
by DIRTY ROCK STAR
internal cage is the problem. most are exo
Posted: Sat Feb 21, 2009 3:55 pm
by bj on roids
ALL my cages on my 40s were internal.
External on the 45 I had..
Search for it...
Posted: Sat Feb 21, 2009 4:03 pm
by AUSDOG
what a wast of a thread title..
45 series.
Posted: Sat Feb 21, 2009 10:34 pm
by bad mudda
Sorry mate i feel like i bloody let you down now
This roll bar was made with the roof off bolted in then put roof back on, it follows the line of the roof nice and tight with just enough room to fit the foam padding around it, also the dash was cut either side to allow the front hoop to go down along side the front pillar.
This one has been built to low and it has'nt had the dash cut out so you can see it's running through the door passage and it get's in the way of the go pedal a bit.
Posted: Sun Feb 22, 2009 8:10 am
by FJ turbo 75
The RTA or Qld transport won't like bars encroaching on the door opening area either
bump
Posted: Sun Feb 22, 2009 7:57 pm
by bad mudda
So..... WTF, did this live up to people's expectations, or was this a thread that was doomed from the begining ?
Re: bump
Posted: Mon Feb 23, 2009 4:13 pm
by AUSDOG
bad mudda wrote:So..... WTF, did this live up to people's expectations, or was this a thread that was doomed from the begining ?
ITS GOT PICTURES OF 40S IN IT, SO IM HAPPY...
Posted: Sun Mar 22, 2009 7:57 am
by BADFJ
How about these?
http://cars.carcity.com.au/photo.php?st ... rer=Detail Page&criteriadata=YToyOntzOjI6Iml2IjtzOjg6IvaaWx%2B2vvxwIjtzOjQ6ImRhdGEiO3M6MTQ4OiKsdP7KMEl3%2FOB4zMtUnowSuKmnJ%2FfDaIZIRotHo8x5oQ1CTAgQ4UZY1zEq3x8C4Kb4pYfSHyWf1x0XhrzfnaQ1FtQ4IqFEISeOWQF5Gt1MhgB1UC9n9s0rarG2LZuFc1TuKq44s0ncSs%2BwFN5OgEiKCGsN3JdXPGXi5sqVquCUEipgQ5UO5CPxIfw7MiGAxwmmObwIIjt9
This is my 40 with a Full Cage from
www.metaltech.com (USA I think i'm the only one has has imported this, well I was 2 years ago)
Posted: Sun Mar 22, 2009 7:58 am
by BADFJ
Posted: Fri Mar 27, 2009 5:33 pm
by crustybj60
metal tech has a great design... i have one too. still have to install it
check
www.ih8mud.com lots of good info and pics of 40 series cages.
cheers
crusty