Page 1 of 1

low voltage

Posted: Sun Feb 22, 2009 3:32 pm
by crazy60
hi just brought a 90 model gq and there seems to be low power for the low beam on the l/h head light hi beam works fine it just low beam has problems have put in a new globe still same prob checked with a test light there is a very little bit power comming through but not enough to light up the test light properly any ideas would be appreciated

Posted: Sun Feb 22, 2009 5:02 pm
by chimpboy
Depending on where you measured the power... sometimes the H4 sockets are in bad shape due to heat damage.