Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

transfer case

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1
Joined: Sun Feb 22, 2009 4:08 pm
Location: Morphett Vale

transfer case

Post by PALEALE »

My mate is after some advice on his Landcruiser, its a '86 model with a 12ht diesel, and has the vaccum operated transfer case
The transfer case has died, and he has sourced another one, but it is a manual /lever operated one
can the manual/lever transfer case be converted to vaccum operated, using parts off of his dead transfer case, or will he have to hunt down a vaccum operated one?
Top
Posts: 5
Joined: Sun Feb 22, 2009 6:37 pm
Location: auckland new zealand

Post by 350cruiser »

check and see if it has the bolt holes on the side where the vac actuator is if not you can drill and tap them to make it fit or replace the transfer case housings from one to the other.
hope this helps
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 107 guests