Outer Limits 4x4 Board

Some rims nice rims have come up cheap, theyre 16x10 so pretty fat, would these be likely to rub on my guards at full flex n whatnot? Cause i beleive they will stick out the guards a little? Thats with 305 MTZ's and a little bit of lift. At the moment i have the mtz on stock gxl rims and have no issues whatsoever, how much of a difference will fatter rims make to things, wear and tear etc

cheers for any replies

i have 16x10's on my 80 with 315 mtr's and they only rub on the front slighly. The back however i dont know, mine's a ute now so i have no clearance issuses.

Grant

I had 16x10 on mine with 33"s on mine, (4" lift) they rubbed a little on full compression, this was mainly because of a wider offset.
I now have 35"s on 16x8 with no rubbing at all.
I found i had problems with beads leaking on 16x10 too