Outer Limits 4x4 Board

Posted: **Tue Mar 10, 2009 8:50 pm**

any one have any problems with hi steer arms hitting the sump on a com V6 conversion 4runner ? cheers daniel

Posted: **Wed Mar 11, 2009 1:19 am**

I think you have to mod ya sump to make it fit.

Posted: **Wed Mar 11, 2009 3:43 pm**

Had to make a reverse sump for my crossover steering to clear.

Matt

Posted: **Wed Mar 11, 2009 10:39 pm**

yeah i thought it was going to be that way?could you pm me a couple of snaps of your sump for some ideas any help would be great cheers daniel

Posted: **Thu Mar 12, 2009 6:52 pm**

Hey, here's how I made minein my Lux. 1.6mm zincanneal Tig welded. Obviously the pick up had to be modified also, for this I cut the ends of it off and brazed a copper pipe bent to suit to them.

Posted: **Thu Mar 12, 2009 10:20 pm**

cool thanks for the pic ,did you modify the left hand engine mount too?
cheers daniel

Posted: **Sun Mar 15, 2009 7:45 pm**

Yeah mate, with the Marks kit the mount hung down far too low and on up travel the arms really caned the bottom of the mount. I ended up cutting up the mount and completely redesigning it. Hopefully the pic shows how.

Posted: **Wed Mar 18, 2009 9:27 pm**

yeah thats awsm mate it did come close to the mount as you said mine is a marks one aswell and has that bent bit hanging down where its been bent! thanks again for your help cheers daniel

Outer Limits 4x4 Board

T/G hi steer on a 4 runner

T/G hi steer on a 4 runner