Page 1 of 1
60 series t/fer case
Posted: Wed Mar 11, 2009 7:21 pm
by rigger329
HI
Will the transfer case from a 1983 60 series, mount into the same standard position in a 1977 hj45 or will i have to reposition the mounts
thanks ed
Posted: Wed Mar 11, 2009 8:38 pm
by Dyna Beast
If you are talking about the transfer case only there is no mounts.There is also no tail shaft hand brake drum on the transfer case.If you are talking about the gearbox and transfer case together.Then there is issues.Ohh man are there issues.Unless the bell housing of the H gearbox matches the gear box of the 2h gearbox out of the 60 series.
Cheers
Posted: Wed Mar 11, 2009 9:36 pm
by Shadow
Dyna Beast wrote:If you are talking about the transfer case only there is no mounts.There is also no tail shaft hand brake drum on the transfer case.If you are talking about the gearbox and transfer case together.Then there is issues.Ohh man are there issues.Unless the bell housing of the H gearbox matches the gear box of the 2h gearbox out of the 60 series.
Cheers
his would be a 2H
only the early 4x series had the H