Page 1 of 1
how much would you pay?
Posted: Sun Apr 11, 2004 12:45 am
by patrolman
found this in the trading post and was just curious if this is worth what he is asking?
" RANGE ROVER 1981, 2dr, fuel injected 5ltr Rover stroker, extractors, snorkel, front & rear lockers, ,50ml body lift, 36in Mickey Thompsons, 10in rims, Recaro seats, roll cage, roller drawers, ARB bars, high mount winch, long range fuel tanks and much more, very capable vehicle, going over-seas, must sell $16800ono RIF537 (03) 97542241 (0419)564936 Upwey"
also found this
--------------------------------------------------------------------------------
NISSAN MQ PATROL SWB, 327 Chev, 14in body lift, 33in mud terrain tyres, no reg, close to RWorthy, clean car, (OSB-445) $3,500 (0400) 100322 Healesville
Posted: Sun Apr 11, 2004 1:41 am
by markil
sounds like a well setup truck to me. but i wouldn't be paying anywhere near that for the rover.
with the patrol, i think it is supposed to be 4in body lift.
i wouldn't know what they're really worth though.
i think the best thing would be to go chack them out, and make an offer that seems fair to you.
Posted: Sun Apr 11, 2004 6:29 am
by SimplyPV
wait a minute... 10 inch rims? wtf?! thats pretty damn small... or am i just reading it wrong?
Posted: Sun Apr 11, 2004 7:38 am
by redzook
SimplyPV wrote:wait a minute... 10 inch rims? wtf?! thats pretty damn small... or am i just reading it wrong?
10in wide

Posted: Sun Apr 11, 2004 7:47 am
by SimplyPV
well it didnt say wide!

Posted: Sun Apr 11, 2004 10:49 am
by Bitsamissin
I think it's too much, if it ain't got maxidrives your gonna be popping the stock 10 spline axles just about every trip up Rocky Tk with 36"s.
A bloke in my club bought a 80 (I think) 2 door Rangie, rebuilt 4.6 HSE donk, extractors, 2" b/l, 3"s/l, 35" pedes, f&R ARB's, sliders, bar and winch for $9K.
He fitted h/d axles (after breaking a front one 1st trip out) and re-wired the sucker (he's an auto leccy) and now it goes well.
Posted: Sun Apr 11, 2004 12:38 pm
by ORSM45
maybe its 1/4 inch bodylift

Posted: Mon Apr 12, 2004 9:54 am
by redzook
Posted: Mon Apr 12, 2004 10:44 am
by robbie
how much would you pay
I wouldn't

Posted: Tue Apr 13, 2004 8:01 am
by bj on roids
SimplyPV wrote:wait a minute... 10 inch rims? wtf?! thats pretty damn small... or am i just reading it wrong?
the smaller the rims, are, the bigger it makes the tyres look!

Posted: Tue Apr 13, 2004 8:20 am
by RaginRover
Interesting to see what mod plates the rangie has on her and yeah 16K does seem very steep, expecially when you have to factor in coming up with an axel "solution"
If you could get it for 12 - 13 I reckon it would be good value ?? What do you reckon,
Tom
Price
Posted: Tue Apr 13, 2004 8:30 am
by Roktruk
Reagrdless of the fruit hanging off it, it's still an 81 Rangie, worth whatever the going price for that year in that condition. Think about what a car yard would offer as a trade - that's a good basis for a starting point.
Then you'd have to contend with LUCAS - PRINCE OF DARKNESS

Posted: Tue Apr 13, 2004 8:48 am
by GRIMACE
Bein an 81 model the goin price would be about $2000-4000 for the vehicle and with all them modifications he probably spent $20000 on top of that in modifications and I would say most modification automatically reduce to 1/4 of there original price almost instantly so thats another $5000
Total $7000-$9000 depending on condition
$16800

Tell him hes Dreeeeeeamin
