Outer Limits 4x4 Board

Hey guys,

Just finished making my 2" Dropped cross member for the front of the lux.

1. What have people done with their recovery hooks on the front, as the c/m will be in the way.

2. Is it worth drilling some holes and bolting it into existing holes or just weld it on?

3. What to do with the brace that links the frame rails with the front cross member, should I just weld on a tab to the new cross member and bolt it to the holes in the rails.

Thanks.

Anyone?

Bubs is probably the best man to talk to, have a look at his member thread or shoot him a PM

in the past ive disgarded the hooks on the front... instead ive gotted 9/16- 5/8 D rings and welded them right to the front. one on each side

wagner40 wrote:in the past ive disgarded the hooks on the front... instead ive gotted 9/16- 5/8 D rings and welded them right to the front. one on each side

Thanks, you welded it to the crossmember or the chassis?

oh... ive taken angle iron to reinforce the front of the chassis, and welded the mount of the D ring straight to the front of the angle iron... like on my old rig.

Perfect, will see what I can do, thanks

use the front bar to mount recovery points

Roctoy Designfab wrote:use the front bar to mount recovery points

Looks abit dodgy... Some average welds there