Page 1 of 1
lift requirements for 35s
Posted: Sat Mar 14, 2009 11:57 am
by waandy
i have recently baught a swb mavrick. i want to run 35s without a body lift as i hear they are to much work and to unreliable. i am about to order an irinman 4 inch lift and wanted to see if it will run 35s with this lift?
i have searched but cant find anything rellevant.
thanks
waandy
Posted: Sat Mar 14, 2009 12:05 pm
by SIM79
4 inch lift will do the job and make sure you extend your bump stops, below is 2 inch lift and 38s
Posted: Sat Mar 14, 2009 12:13 pm
by flexytj
do a guard chop and fit appropriate bump stops and dont lift it at all
Posted: Sat Mar 14, 2009 3:24 pm
by cooki_monsta
4" lift in a swb will cause you heaps more headaches then a body lift, the max you wanna go is 3" and even then you will most likly still have problems with your driveline
Posted: Mon Mar 16, 2009 11:36 am
by coxy321
flexytj wrote:do a guard chop and fit appropriate bump stops and dont lift it at all
x2
Or at least throw in a 2" lift, and this will get you around the normal issues with lifted SWB's.
Posted: Mon Mar 16, 2009 12:06 pm
by bogged
coxy321 wrote:flexytj wrote:do a guard chop and fit appropriate bump stops and dont lift it at all
x2
Or at least throw in a 2" lift, and this will get you around the normal issues with lifted SWB's.
x eleventy