Page 1 of 1
Snorkel compatability
Posted: Sat Mar 14, 2009 12:02 pm
by mrRocky
Just wondering if any other model snorkels fit sierra's, as i can get them for some patrols and cruisers for $270 ea and they look similar size to the gooki ones. The cheapest sierra ones i can find is $385 and i aint payin that, i would rather make my own.
has anyone used one from other model 4x4's ?
Posted: Sat Mar 14, 2009 2:43 pm
by nicbeer
make one.
3" exhaust pipe is what mine is.
Posted: Sat Mar 14, 2009 5:19 pm
by mrRocky
pipe ones look ratty
Posted: Sat Mar 14, 2009 5:29 pm
by nicbeer
mrRocky wrote:pipe ones look ratty
not a good pic but came out really good and a lot stronger
Posted: Sun Mar 15, 2009 12:15 am
by mrRocky
spose i will have to make one then, i cant justify $385 for one when it will cost $100 or less to make one. Heres a question, did you make yours 3" then step down to the size of the airbox or use a silicone reducer ?
Posted: Sun Mar 15, 2009 8:10 am
by lump_a_charcoal
I managed to sourse a 3 inch to 65(?)mm elbow/reducer, which fits onto the box perfectly.
Posted: Sun Mar 15, 2009 12:33 pm
by nicbeer
mines 3" all the way into the airbox but i have a vitara efi airbox and its a 3" inlet.
cost about 110 all up inc the ram head.
Posted: Sun Mar 15, 2009 1:20 pm
by GRPABT1
High pressure vaccuum hose ftw! lol Cost me nothing and takes a beating without damaging my panels
Yeah I know it looks crap but it's a 4by not a show car.