has anyone replaced there original tail lights with LED ones with the standard rear bumper? i keep having problems with mine blowing globes from all the water and mud getting it there all the time, i was thinking if i tock the original lights out and try fitting something like these http://cgi.ebay.com.au/LED-TAIL-BRAKE-I ... 240%3A1318 so thay sat in the bumper flush not just screwed to the out side, any one done something similar? got pics?
cheers scott
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
LED tail lights
They're the LED autolights type - I've got them on the back of my tray and they're great, but I think they're too big to go inside the bumper.
There's heaps and heaps on the market now. Browse some online catalogues etc to work out what fits the best.
Remember you'll need an LED compatible blinker unit too, which requires a little bit of rewiring to get to work.
LED lights are the shizzle.
Steve.
There's heaps and heaps on the market now. Browse some online catalogues etc to work out what fits the best.
Remember you'll need an LED compatible blinker unit too, which requires a little bit of rewiring to get to work.
LED lights are the shizzle.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
^^ your zuk isnt tall enough, i think you should lift it some more =P
im running standard rears but LED indicators and park lights up front, theyre the mini trailer ones that measure about 60mmx12mm, very bright and ADR approved - but a resistor needed to be added to the wire to slow down the blink rate so it wasnt like a strobe light hehe
im running standard rears but LED indicators and park lights up front, theyre the mini trailer ones that measure about 60mmx12mm, very bright and ADR approved - but a resistor needed to be added to the wire to slow down the blink rate so it wasnt like a strobe light hehe
The worst thing about censorship is ███████.
Re: LED tail lights
DavePatrol wrote:has anyone replaced there original tail lights with LED ones with the standard rear bumper? i keep having problems with mine blowing globes from all the water and mud getting it there all the time, i was thinking if i tock the original lights out and try fitting something like these http://cgi.ebay.com.au/LED-TAIL-BRAKE-I ... 240%3A1318 so thay sat in the bumper flush not just screwed to the out side, any one done something similar? got pics?
cheers scott
I think thats the same as this lamp:
http://www.ledautolamps.com/product-details.php?pid=28
Ive been trying to come up with a LED/bumper combo for the rear of my Sierra for over 12 months now, and considering the cost of some of the ones Ive wanted, these 80mm combo ones dont look too bad an option. Not sure how they'd look in a standard zook bumper, but I guess you could make them work.
Wheeling on completely wicked angles, without even looking stable.
Who is online
Users browsing this forum: No registered users and 0 guests