Page 1 of 1
Anyone with rocky manual - help please
Posted: Mon Apr 12, 2004 1:06 pm
by lay80n
Hey
just after the water pump r&r parts of the manual, or the torque specs for water pump and the cooland filling and bleeding info. If anyone can mail these to me or send ifo somehow that would rock.
cheers
layto....
Posted: Mon Apr 12, 2004 1:26 pm
by Goatse.AJ
I got the following advice for torque settings recently:
Torque settings - 2 grunts big bolts... 1 grunt small bolts...
Posted: Mon Apr 12, 2004 1:32 pm
by lay80n
hehehe two grunts Nm and one grunt Nm, like that. Though the foreman at work would probably not apprectate that when working on a $70,000 statesman
.
Posted: Mon Apr 12, 2004 6:33 pm
by Spartacus
daihatsu f70 f75 f77
are u after radiator coolant filling and emptying???
if so:
remove the cap
place container below the drain plug
drain coolant by removing drain plug
close drain plug
fill system with water
start engine. stop it
repeat 2 to 3 times
fill radiator and reserve tank with antifreeze according to manufacturer
fill with water
start engine-check coolant level add water as required
tighten radiator cap
warm engine then allow coolant to atmospheric temperature
(coolant refers to the mixture of water and antifreeze)
basically what to do. PM RICK and get it right
as for torque
|tightening torque|
| N.m |
cylinder x water pump | 18.1 +- 3.4 | DRY
send a pm to rick
or any one else
cheers lucas
Posted: Tue Apr 13, 2004 3:11 pm
by lowrider3
Water Pump
Tightening Torque for diesel non turbo as of 84
kg-cm 150~200
ft-lb 10.8~14.5
Posted: Tue Apr 13, 2004 10:02 pm
by lay80n
Thanks people
as for changing coolant i got that under control (mechanic by trade) was just interested if the rocky had a specific bleed point like commadore V6's style.
thanks for the info.
layto....