Outer Limits 4x4 Board

OK I looked in the new winch bible and could not find what I need.

Does anyone have links to low and hi mount mounting details.

Hole paterns required clearences or actual winch dimensions.

Cheers

Warn website... http://www.warn.com/truck/winches/line.shtml

Has all the bolting dimensions and overall dimensions of each winch, you will just have to go through and compile.

Ill cut you a deal, ill do all the warns and you can do other brands if you like and then get it stickied?

XP 9.5




Winch Dimensions: 22.7" L. x 6.3" D. x 7.7" H.
(577mm L. x 160mm D. x 196 mm H)
Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)

9.5ti




Winch Dimensions: 23.1" L. x 6.3" D. x 10.0" H.
(587mm L. x 160mm D. x 254mm H.)
Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)

m12000




Winch Dimensions: 24.37" L. x 8.45" D. x 11" H.
(6.19mm L. x 214.63mm D. x 279mm H.)
Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)

XD9000




Winch Dimensions: 21.8" L. x 6.3" D. x 7.6" H.
(555mm L. x 160mm D. x 193mm H.)
Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)

Tabor 9k



Mounting Bolt Pattern: 10" X 4.5" (254 mm X 114.3 mm)

M8724-50




Winch Dimensions: 16.5" L. x 8.5" D. x 15" H.
(420mm L. x 220mm D. x 381 mm H.)
Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)

That's excellent thanks guys, any side on dimesions?

I need to make a bar the will take a low mount now and a hi mount as a straight bolt in later.

Cheers

High mount is 220mm front to back.