Page 1 of 1

Member intro / mu :-)

Posted: Tue Apr 13, 2004 12:53 am
by El_Hombre
A lil intro to ya'll.


Have a 92 MU for coming up t 2 years now. I modded what i could get more power for the stock 2.8TD. Still got bored so hold out for what i've done to it now...!!!


It's been off the road for 2 weeks now. The engine/trans n transfer case is out, 4 x rancho rs9000x's are in (9 way adjustable). Never before seen engine conversio in a MU is under way... hehehe

This one is going to be one of a kind....


more details as they come.

Nice to come across a board like this and i hope it turns out to be a great resource.. :) :lol: :lol:

Posted: Wed Apr 14, 2004 12:10 am
by Westoztroopa
Welcome again! Looking forward to seeing what you are doing. :cool:

Cheers,

Noel

Posted: Wed May 26, 2004 8:27 am
by Fieldsy
if you have a standard exhaust system . piss it off and replace it with 65mm tube from turbo to tip include a new 65mm flexipipe as your old one is 35mm inside and stuffs the turbo speed up. your injecter pump can be adjusted by using a 13mm deep dish socket and a small flat blade screw driver. crack the locknut on the rear of the injecter pump and turn the screw in 3/4 turn in max.if your injecterpump has never been touched you will have to remove the locking cap with some pliers. allso get rid of the standard air cleaner and replace it with a ram pod. you will then be able to light the tryes up at the lights.

Posted: Wed Jan 19, 2005 6:54 pm
by Westoztroopa
You still around El Hombre? Dont keep us in suspense... :?

Noel