how to tell difference between gq and gu diff centres
Posted: Fri Mar 20, 2009 12:09 pm
is there any way to tell the difference between a gu and a gq diff centre from the outside?
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
how to tell difference between gq and gu diff centres
Page 1 of 1
Posted: Sat Mar 21, 2009 9:52 am
not to my knowledge
Posted: Sat Mar 21, 2009 3:01 pm
Not from the outside, the shampher on the crownwheel is deeper cut on some GU centres, and GQ low cut crowns wont fit that hemisphere
Posted: Sun Mar 22, 2009 1:17 pm
Here in Panama all GQ SWB and LWB came from Japan with H233Bs. GQ UTEs came with H260s. GU SWB and LWB came with both H233Bs and H260s.
This is the H233B
This is the H260
As you would notice, the H233B is round (the pumpkin) and the H260 has a flat spot at the bottom.
This is the H233B
This is the H260
As you would notice, the H233B is round (the pumpkin) and the H260 has a flat spot at the bottom.
Posted: Mon Mar 23, 2009 5:06 am
Forgot to mention, H233Bs 3rd member bolts on to the diff housing with 11 bolts and H260s with 12...
Posted: Mon Mar 23, 2009 12:13 pm
yeah, but the flat spot on the H260 wouldnt affect the shape of the centre would it?
Posted: Tue Mar 24, 2009 8:26 am
Not sure about that one.patrolla wrote:yeah, but the flat spot on the H260 wouldnt affect the shape of the centre would it?
Posted: Sat Apr 11, 2009 3:13 am
This guy shaved his H260 and as you can see, he removed material from outside but never touched the internals. Found this in another post right here ...
