Outer Limits 4x4 Board

Howdy all, just a quicky.
Would i be able to get a few pic's of the "box section engine mount adaptor" on the drivers side engine mount from BenT's kit, installed if there handy. had the engineer over just before i installed the engine and he was huming and harring about it. a few pics of installed ones (engineered if possable) might allow him to work out some loads, or something. . wateva engineers gave 4-5yrs of there life for.

Here are a couple i have on file but you can hardly see it in there.

thats a bit unlucky about your engineer mate,when i got mine done (but in NSW) i pointed out the engine mount and adaptor plate and he replied oh yeh no worries that will work a treat haha

yea Im thinking he thought it might have been an extension arm back to the mounting point now that iv looked at it again. doesnt help that i had the origional engine mount hanging off of it with a bolt to keep it out of the way Was more intrested in talking about my lux diffs that i had sitting there than explaining the engine mount at the time. anyways mudbits pic might show him wats going on, cheers mate!

Well timed thread, I was looking for the maker of the adapter plates and who was selling the two inch bodylifts ... In opening two threads I have found both..

Think he had the adapter kit on ebay for some non installed pics.

Do you still need pics? as i can do a couple of mine if necessary