Outer Limits 4x4 Board

Ok, i went for a test run and some photos on saturday and i appear to have torn/over stretched a front flexy brakeline at the brake end of the diff (the 20cm rubber jobs).
Anyone know if any local places do a replacement thats abit longer or stronger?
or do i have to ring my local ENZED bloke and try to get a cashy?
has anyone had this happen before? im not too sure if its due to getting too much steering lock? my truck has a piss poor turning circle so i wouldnt have thought so. but it appears to pull tight when turning full lock.

any help appreciated.

for the record its not the flexy ling from chassis to diff i already have BBM extended ones there.

Just take it off and take it to a brake joint place, repco, bursons etc and find something off the shelf that matches and is a bit longer, or make them up using the steel 'bundy' tube.

Failing that, you should be able to get custom braided made up, but your looking at $80+ per line

If the rears are longer you could use a set of them.

cheers guys i will have a measure up this afternoon as soon as i can to see if the rears are longer or not.
that would likely solve my dramas.
i only have until wed arvo until i load my truck onto a flat top for transporting to tufftruck thursday.

if your short on time, and cant find an alternative straight away, just replace with stock std one. sort something else out later. whats the odds on tearing another one??

Pretty good seeing as he's competing this weekend!!

yeah got a couple of days left

ring Rick at BBm he should be able to sort you out with something

shaun cheers. i already have BBM extended lines.
but standard from the diff housing to the knuckle etc.
i will give uncle ricko a buzz though.