Page 1 of 1
won't hold low range in mk
Posted: Tue Apr 13, 2004 5:53 pm
by Big Red Toy
my mk has recently started jumping out of low range, any fixes????
Posted: Tue Apr 13, 2004 6:56 pm
by matthewK
can ajust the linkages , play or fatigue in the transfer case mounts
or it could be gears just a tad warn or wrong adjustments
but see what ya can do
hope this helps
i had same prob with my old jackaroo
matthewk
Posted: Tue Apr 13, 2004 11:22 pm
by MQ080
check mounts first, is there any other vibration from the box or is the stick in an unusal position in relation to the floor?
Posted: Wed Apr 14, 2004 11:07 am
by bazzle
check stick hitting 1st.
2nd the detent ball may be stuck or need washer under spring
3rd, end float /play in box
bazzle
Posted: Wed Apr 14, 2004 4:49 pm
by TwistedMQ
Have u modified the floor or the leaver to suit the body lift
Posted: Wed Apr 14, 2004 6:13 pm
by Big Red Toy
thanks, i have cut out the floor for the body lift, its seems to only do it after it has been running a while, checked today and the mounts look fine, maybe i'll have to do some unbolting???