Outer Limits 4x4 Board

hows it going, im after a little something to dress up the front and maybe the rear of my sierra, thing is im not to keen on most of bull bars out there with arb probably the best lookin so far on the little old zuk.

so for now im just after some pics and or manufactures, thanks.

have you also considered custom bar work it is alot cheaper

cheers jesse

yea i have thought about it but wouldnt know where to start, thats why im after some ideas and pictures.

thanks for your reply too

the rear bar on my missus zook is made out of 100x50x6 c section sorry no pics

This bar was made out of 40mm tube was the first bar i made but we hit a tree and it twisted it


This was the bar on my zook. I made a similar one for the red one above this one was welded straight to the chassis (not advisable) and the one i made for the red one was 70mm tube for the main bar mounts were 6mm flat welded to chassis, 25x50 rhs were welded to the 70mm tube and the other end was welded to another two plates to bolt it up the plates welded onto chassis 50mm tube for top and bottom hoop.


sorry for the long post these are the only pics i have of it

hope this helps you mate

cheers jesse

thanks. i might go custom, jsut a little concerned about mounting it

use the 4 factory holes with crush tube.
add another two tabs on the crossmember between the rails and you will have it more than securely mounted with 6 points.

ill post some pics of mine soon.

thanks, keen to see some pics

if you want strength, protection and ok looks from a sierra bar
there is only one choice and that is a arb bar. this one has slammed heaps off stuff and has never broken a mount or damaged the car.

sheps wrote:if you want strength, protection and ok looks from a sierra bar
there is only one choice and that is a arb bar. this one has slammed heaps off stuff and has never broken a mount or damaged the car.

I 2nd that ive seen bazooked ram a tree in his old shorty with a arb bar and only put a little dent in it, if it had have been a stock bumper his front end would have been rooted he also said he had hit a dunlop dog (big hairy paint ad dog) doing 110kmh and didnt even mark it.
Ill see if bazooked has the video of him ramming the tree on his computer its a crack up

i have a arb winch bar that is going onto a lwb sierra.
it hit a tree hard enough to have the motor and gear box come
out off the car and the only damage to the bar is a little crease that
i probably will just leave there. they should be standard equipment
on all sierra's.

here are the links to mine
http://s45.photobucket.com/albums/f90/r ... G_2386.jpg

factory mounts
http://s45.photobucket.com/albums/f90/r ... G_2383.jpg

the 2 extra tabs fitted to the cross member
http://s45.photobucket.com/albums/f90/r ... G_2384.jpg

rear bar getting modded

front one getting made

Sheps: your silverstones bag nicely

Josh

31zook wrote:Sheps: your silverstones bag nicely

Josh

that photo is my old POS mongrals they used to go flat overnight.