Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2.4 deisel 4runner wont start just spins freely

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 331
Joined: Thu Feb 17, 2005 9:49 am
Location: Albury

2.4 deisel 4runner wont start just spins freely

Post by roberts »

AS TILE ANY SUGGESTIONS
Top
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Contact:
Contact joel HJ60

Post by joel HJ60 »

What do you mean it spins freely?

Does it just crank?
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Top
Posts: 331
Joined: Thu Feb 17, 2005 9:49 am
Location: Albury

Post by roberts »

cranks but as if there is no compression fuel is being deliveried and have pulled timing cover off and timing marks correct but number one inlet valve seems to be half open.

it came about i wass flushing the cooling system out sitting idealing and then just stopped. exhurst fumes come through airbox when cranked
Top
User avatar
mike_nofx
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

roberts wrote:cranks but as if there is no compression fuel is being deliveried and have pulled timing cover off and timing marks correct but number one inlet valve seems to be half open.

it came about i wass flushing the cooling system out sitting idealing and then just stopped. exhurst fumes come through airbox when cranked
you flushed cooling system when idling... ?
Top
Posts: 1715
Joined: Tue Sep 06, 2005 8:38 pm
Location: at my wits end

Post by RED60 »

Broken cam....
Show me the money..SHOW ME THE MONEY
Top
Posts: 331
Joined: Thu Feb 17, 2005 9:49 am
Location: Albury

Post by roberts »

just found the broken pin that holds the cam gear to the end of the cam causing the gear to turn 45 degres to the righ and holding valves open. couldnt work it out as all the settings where right just not the cam.
Top
Posts: 331
Joined: Thu Feb 17, 2005 9:49 am
Location: Albury

Post by roberts »

mike_nofx wrote:
roberts wrote:cranks but as if there is no compression fuel is being deliveried and have pulled timing cover off and timing marks correct but number one inlet valve seems to be half open.

it came about i wass flushing the cooling system out sitting idealing and then just stopped. exhurst fumes come through airbox when cranked
you flushed cooling system when idling... ?
yes the correct way to flush a system with the heater on had a lot of old water that i wanted to flush, this didnt cause the problem just a couincidence
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest