Page 1 of 1
ZOOK AUTO
Posted: Tue Apr 13, 2004 9:39 pm
by Midget
I know this is a Tonka,but i need some info on what auto tranny will fit a 1.3 ltr sierra engine.
If anyone has done this or has info on it could let me know.
Thanks
Jamie
Posted: Wed Apr 14, 2004 12:14 am
by bigsteve
I think my reply to this topic the last time it got posted was something along the lines of:
If the 16. vit engine bolts up to the 1.3 5 speed then possibly a 1.6 auto would bolt up to a g13???
Steve
Posted: Wed Apr 14, 2004 7:16 am
by Midget
Yeah but i want it divorced,so i can run the series 3 sierra transfer case.
Jamie
Posted: Wed Apr 14, 2004 7:19 am
by moose
ring joe at 4PLAY OFFROAD !!!
03 97614694
but not too early !!!
he has done a few auto sierras !!!
Posted: Wed Apr 14, 2004 7:23 am
by bigsteve
Fourwheelin wrote:Yeah but i want it divorced,so i can run the series 3 sierra transfer case.
Jamie
Vit auto & tcase into 6:1 tcase
Posted: Wed Apr 14, 2004 7:30 am
by moose
bigsteve wrote:Fourwheelin wrote:Yeah but i want it divorced,so i can run the series 3 sierra transfer case.
Jamie
Vit auto & tcase into 6:1 tcase
& also that set up !!! but not sIII !!!!
"how low can ya go !!!"
Posted: Wed Apr 14, 2004 7:39 am
by bigsteve
moose wrote:bigsteve wrote:Fourwheelin wrote:Yeah but i want it divorced,so i can run the series 3 sierra transfer case.
Jamie
Vit auto & tcase into 6:1 tcase
& also that set up !!! but not sIII !!!!
"how low can ya go !!!"
Never low enough
Posted: Wed Apr 14, 2004 9:36 am
by Drewfus
dare i suggest the Jimney auto?
Posted: Wed Apr 14, 2004 11:24 am
by greg
Overkill Engineering (previously known as Overkill (previously known as Sam)) was also donig something with autos for a sierra... I think they were Corolla engines?
Have a little search - Sam posted up some stuff about it a while ago.
Posted: Wed Apr 14, 2004 4:07 pm
by 1MadEngineer
grab an early vitara auto an t/case, remove b/housing,pump and 1st planetry set ( and spacer disc), transplant into std 4cyl torana trimatic and jam sierra t/case behind.
or as i did
keep viitara t/case behind remove output and drop leg, keeping reduction unit and put a flange on output shaft then sierra t/case = 1.81 x 2.24 x ???
Posted: Wed Apr 14, 2004 4:33 pm
by Drewfus
Note: the Auto box behind a 4K corrolla unit was a trimatic.....
More useless info.
Posted: Wed Apr 14, 2004 9:26 pm
by Midget
1MadEngineer wrote:grab an early vitara auto an t/case, remove b/housing,pump and 1st planetry set ( and spacer disc), transplant into std 4cyl torana trimatic and jam sierra t/case behind.
or as i did
keep viitara t/case behind remove output and drop leg, keeping reduction unit and put a flange on output shaft then sierra t/case = 1.81 x 2.24 x ???
If i work on that formula,I would have 1.81 x 2.24 x 6.1 =10.4544:1 before i got to the diffs.
Dam that would be low...
Jamie
Posted: Thu Apr 15, 2004 8:29 am
by stu
24.73 is what i got