Page 1 of 1
Diff Questions? WMS to WMS?
Posted: Tue Mar 31, 2009 8:48 am
by Remydog05
Just a couple of questions I couldnt find in the bible?
What is the width of a Rangie/Disco Diff? EG from WMS (Wheel mounting Surface) to WMS?
Is it from 94 that the stronger 24 spline Axels,etc came in?
So 80's rangies would be 10 spline?
Re: Diff Questions? WMS to WMS?
Posted: Tue Mar 31, 2009 3:54 pm
by mu-stu
Remydog05 wrote:Just a couple of questions I couldnt find in the bible?
So 80's rangies would be 10 spline?
Definitely (unless they've been upgraded sometime in the past)
Not sure about the other bit though.
Posted: Tue Mar 31, 2009 4:44 pm
by ISUZUROVER
WMS about 61" for RRC and disco.
Posted: Tue Mar 31, 2009 6:17 pm
by KiwiBacon
1556mm for a 24 spline disco rear axle.
So yeah, 61 inches.
Posted: Fri Apr 03, 2009 11:29 am
by Remydog05
Thanks All
Is it right that Rangie and Early Disco had the 4link and the later ones had the knuckle looking Aframe type setup?
Which is best?
Posted: Fri Apr 03, 2009 12:16 pm
by KiwiBacon
Remydog05 wrote:Thanks All
Is it right that Rangie and Early Disco had the 4link and the later ones had the knuckle looking Aframe type setup?
Which is best?
They are all the same.
Early rangies (before they had sway bars) had a third spring in the rear, a self-leveller working in the middle of that A-frame.
The three link rear suspension they use is the same as a triangulated 4 link.
Posted: Mon Apr 06, 2009 6:26 am
by Remydog05
Thanks !!!!!!