Page 1 of 1
Massive Camber on 92 IFS Sr5 Lux
Posted: Wed Apr 01, 2009 10:18 am
by Ashley_bmx
Hey guys, 1st post, how exciting, anyway, I've got Massive camber on my hilux and it cant be taken out with a wheel alignment and they couldnt tell me the cause, Just curious if you guys know of a common cause, i only need a temporary fix as i'm doing an Overkill Engineering solid front conversion, Cheers, Ash
Posted: Wed Apr 01, 2009 12:19 pm
by leehamescort
Something must be bent (chassis, arms, etc) or bushes flogged out or ball joint collapsed.
not normal.
I'd be very concerned if you got a wheel alignment and the wheel alignment guys couldn't work out where the problem was. If it was minor they should be able to adjust it out, if its beyond the adjustment then something is seriously bent.
good luck
Posted: Wed Apr 01, 2009 12:29 pm
by Ashley_bmx
leehamescort wrote:Something must be bent (chassis, arms, etc) or bushes flogged out or ball joint collapsed.
not normal.
I'd be very concerned if you got a wheel alignment and the wheel alignment guys couldn't work out where the problem was. If it was minor they should be able to adjust it out, if its beyond the adjustment then something is seriously bent.
good luck
Yea Thanks matey, i know the ball joints a flogged out, but i didnt think it would cause this much camber, Anyway, went to the bank just before and applied for a minor mortgage to do the solid conversion. HAHA thanks again
Ash