URGENT HELP REQUIRED ON ENDLESS AIR TB42E SET UP
Posted: Thu Apr 02, 2009 11:03 am
Hi all
I have a current project on the go fitting endless air to my patrol tb42e. I have see all the info on this forum re: brackets and fitment. i have modified one design i found on here to suit the tb42e patrol but the only thing that is stopping me at this point is the bottom radiator hose housing it is in the way of the belt wrap.
HAS ANY ONE CONPLETED A ENDLESS AIR TO A TB42E ENGINE AS DEISEL ENGINE SET UP IS DIFFERENT AND ALL REFERENCE MATERIAL REFERS TO TD42 AND TD6 ETC NOT PETROL ENGINE SET UP.
THE BOTTON HOSE HOUSEING ON THE BLOCK NEEDS TO BE MOVED AT LEAST 50MM TOWARDS THE STEERING BOX. I WAS GOING TO MAKE A SPACER UP BUT WANTED TO KNOW IF OTHERS HAD SEEN THIS SAME PROBLEM
THANKS IN ADVANCE
I have a current project on the go fitting endless air to my patrol tb42e. I have see all the info on this forum re: brackets and fitment. i have modified one design i found on here to suit the tb42e patrol but the only thing that is stopping me at this point is the bottom radiator hose housing it is in the way of the belt wrap.
HAS ANY ONE CONPLETED A ENDLESS AIR TO A TB42E ENGINE AS DEISEL ENGINE SET UP IS DIFFERENT AND ALL REFERENCE MATERIAL REFERS TO TD42 AND TD6 ETC NOT PETROL ENGINE SET UP.
THE BOTTON HOSE HOUSEING ON THE BLOCK NEEDS TO BE MOVED AT LEAST 50MM TOWARDS THE STEERING BOX. I WAS GOING TO MAKE A SPACER UP BUT WANTED TO KNOW IF OTHERS HAD SEEN THIS SAME PROBLEM
THANKS IN ADVANCE