Page 1 of 1
Warn 8274-50
Posted: Wed Jan 22, 2003 1:36 pm
by Bodge
Has anyone wired up an in-cab switch for a 5 pin 8274-50?
- I need a wiring diagram!
I have a diagram for a 3 pin but the extra two wires have thrown me
[didn't take much]
Posted: Fri Jan 24, 2003 10:38 am
by MKPatrolGuy
Re: Warn 8274-50
Posted: Tue Apr 08, 2003 7:39 am
by FIGJAM
Bodge wrote:Has anyone wired up an in-cab switch for a 5 pin 8274-50?
- I need a wiring diagram!
I have a diagram for a 3 pin but the extra two wires have thrown me
[didn't take much]
I wired mine last week you need a switch with 6 connections and some 5 core trailer wire . in the box connect each wire to each connection going to the relays from the original plug on the cover. 1 wire will be Battery power, 1 wire will be earth, 1 wire will power up on in, 1 wire will power up on out and the last remaining wire needs to connect to earth when you switch in or out.
Hope this helps you.
Posted: Wed Apr 09, 2003 7:02 pm
by duncan
Any chance you could email me the diagrame for wiring the 3 pin switch as Ive just bought a older version of the high mount winch I want to keep the original box on the front but also have switching ability on the inside of the vehicle please send to
jbdb@iprimus.com.au
thanks
Posted: Fri Apr 11, 2003 7:03 pm
by FIGJAM
duncan wrote:Any chance you could email me the diagrame for wiring the 3 pin switch as Ive just bought a older version of the high mount winch I want to keep the original box on the front but also have switching ability on the inside of the vehicle please send to
jbdb@iprimus.com.authanks
Ive got a 3 pin high mount on the missus rig, connect 1 wire to all the connections on the relay cover if you check the wires with a multimeter you will have 12V (batt) power on one, one for in and the other for out.
Connect these to your two wayswitch Jobbie done. 8)