Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lower rear arms

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 62
Joined: Mon Dec 05, 2005 9:20 pm
Location: A.C.T

Contact:
Contact crazy60

lower rear arms

Post by crazy60 »

just wondering would it be better to have no weight on the suspension when changing the arms or it does not matter
GQ LWB ,4" lift ,lsd rear, 33"BFG MUDDIESl
Top
JBE
Posts: 258
Joined: Tue Oct 07, 2003 2:39 pm
Location: Sydney

.

Post by JBE »

I had the handbrake on, hubs locked, 4wd engaged and put blocks under the tyres when I swapped mine. I did one at a time and it worked fine. I think, I used a ratchet strap for the fine tuning :D

Cheers
Joachim
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

I had the front wheels chocked. And just moved the axle forwards or back slightly with my foot. Ok one took alot of effort and had to get someone else to put the bolt in.
THOUGHT FOR THE DAY....
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

i did mine and someone elses by reversing ever so slightly (clutch still slipping) till it was alligned perfect worked great but if your not confident or not paying full attention then it cana be hard.

better off chocking the front wheels and using a ratchet strap or something
turbos are nice but i'd rather be blown
Top
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

I do mine quite regulary as the bushes don't really last very well.
Basically handbrake on and then do one at a time. Never had a drama and to line up the bolt just roll the wheel a bit to move it foward of back.
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 53 guests