Outer Limits 4x4 Board

Hi all,
I'm just letting you all know that we are now making fibreglass front doors for the comp trucks. They weigh about 7-8 kg and you can have the option of a Kevlar door skin. For those who have heard of Sandy Bowman he is doing the testing on his tiger colored GQ ute. He also runs our Fibreglass front gaurds and bonnet.

Bonnet skin, $200
Bonnet fully ribed and hinge mounts, $395
Front Guards, $220 each.
Front doors, $600 each Kevlar skin $80 extra.

Cheers Jase.
You can contact me on 03 97380444.

Dont suppose you make gu ones

Fglass wrote: Front Guards, $220 each.

Any pics and more info on the guards? Your web site is down :(

Also interested in the guards

Welchy

Im also interested in the guards. bonet & doors
# are they lighter ? by how much.
# can they be pigmented the colour you want to paint them,so scratches & chips dont show as bad.
# can the wheel arches be made to fit upto 37" tyres.
# can they be a deeper guard so as to cover wider tyres.
Ive tried your site but it is down
I have also PM'd you with my contact details.
cheers piglet

the bonnet, will you do one with a gu scoop already on it for a gq?

Factory copy GU flairs - you would clean up.

pigletracing wrote:Im also interested in the guards. bonet & doors
# are they lighter ? by how much.
# can they be pigmented the colour you want to paint them,so scratches & chips dont show as bad.
# can the wheel arches be made to fit upto 37" tyres.
# can they be a deeper guard so as to cover wider tyres.
Ive tried your site but it is down
I have also PM'd you with my contact details.
cheers piglet

#1 Yes they are lighter, Bonnets Are 8-9 kg, Guards are 2 kg each and doors are about 8 kg each.

#2 yes they can be in any colour as long as its black or grey as these are our stock colours.

#3 There are 3 differant wheel arch sizes, standard, Up to 37 inch tyre, Up to 42 inch tyre.

#4 No they only have a larger cut out with a return lip.

cooki_monsta
Posted: Mon Apr 06, 2009 2:35 pm

--------------------------------------------------------------------------------

the bonnet, will you do one with a gu scoop already on it for a gq?
Yes we can compleatly customise any part to ary requirement.

[/img]

Sorry about the pic of my ute my wasn't ment to be there.
As you can see we can graft just about any scoop into a bonnet.
I hope these pics are of some help to you all.

Cheers Jase.

Nice work!

Would you be looking into other options later like say carbon fibre? and maybe removing that ugly groove from the centre of the bonnet?

Dan

Thanks for the pics Jase, I will see if I can put together a bulk buy from QLD
as I think Ive got the Freight covered for $0 or at least very minimal $$
OOHH & nice ute,Ive always been a holdern fan,, theres an exelent buy coming up here soon, my neibour has done up an EH ute with every thing, it was his baby metalic silver,lowered, mags,tinted windows, lots of crome ect,drove it maybee once a month & was guaraged the rest of the time, any way he has just died.... & his wife is selling everything,property,house, cars the lot $7k would pick it up when shees ready to deal I rekon its worth $15k
Cheers Piggy

are the doors full size or are they cut down rock doors?? can u make the rock doors?? ie the cut down ones?

Ryan wrote:are the doors full size or are they cut down rock doors?? can u make the rock doors?? ie the cut down ones?

Thats what I was going to ask.

Ryan wrote:are the doors full size or are they cut down rock doors?? can u make the rock doors?? ie the cut down ones?

The doors are full size, I can make them any hight you want, I can custom the doors to your needs. The next pair i make I'll take some pics and post them.

Cheers Jase.

Any discount for outerlimits blokes ???

any freebes for your next door neighbour i will let the boys know how good they are if you need me to test them lol

Fglass wrote:

Ryan wrote:are the doors full size or are they cut down rock doors?? can u make the rock doors?? ie the cut down ones?

The doors are full size, I can make them any hight you want, I can custom the doors to your needs. The next pair i make I'll take some pics and post them.

Cheers Jase.

Sweet.

I want to get a Kelvar front end and cut down comp doors for my new rig. I curently have your fibreglass front guards on but they didn't like the last couple of rollovers and run ins with rocks at tuff truck over the last couple of years.

I'll probably make the guards myself though as there going to be half the size of your 42inch cut ones I bought off you last time. The kevlar cut down doors and a bonnet I will definently be interested in though.

Cheers Mick.

sickgqq wrote:Any discount for outerlimits blokes ???

As a matter of fact yes, i think you boys need a break every now and again. Its not much but I'll give you all 15% off all my products.
I hope this helps you guys out.

Cheers Jase.

interested in doing GU panels?

Any idea how much weight could be saved with a glass bonnet and 2 guards?

Looking for areas to cut down weight

cheers

PAUL

vanbox wrote:interested in doing GU panels?

Any idea how much weight could be saved with a glass bonnet and 2 guards?

Looking for areas to cut down weight

cheers

PAUL

We already do GU bonnets they weigh about 9 kg. We will be doing gaurds very soon, they will weigh about 2.5 kg each.

Cheers Jase.

any updates with these?

Gu doors?
GU flares to suit a DX?

did we get a price on bonnet & guards fo a gq will you make a speacel order im after th guards that stop at indent on side

KYSI wrote:any freebes for your next door neighbour i will let the boys know how good they are if you need me to test them lol

testing has been going well.... the doors have now done about 1500kms of off road including hyden 450.. and the finke desert race... and they make a massive difference to the handling of the car...they have taken a hit from another comp car at finke and still going strong..........

thanks jt

Hi all,

Sorry for the long delay, I am in search for some good GU front guards with flares so i can paint and mould them. In return I will give you the first set of fibreglass guards that will come out of the moulds. These new guards will have the flare Incorporated into the guard.

if there is anyone willing to donate a set of guards with flares please call me asap.

Kind Regards. Jason.
JT FIBREGLASS PRODUCTS.
(03)97380444.

What bout a stock GU scoop size (EG, stock mount plate on bottom to match std hole in bonnet) but with a higher opening, like the WRX sized opening would be great. There is interest on few forums for these.
like this one


Would these be doable?

Any update on these?

Fglass wrote:

sickgqq wrote:Any discount for outerlimits blokes ???

As a matter of fact yes, i think you boys need a break every now and again. Its not much but I'll give you all 15% off all my products.
I hope this helps you guys out.

Cheers Jase.

so is that 15% off the prices quoted above ?