Page 1 of 1
"poly air" air bag spacers???
Posted: Mon Apr 06, 2009 1:39 pm
by DAVESGQ
hi. i bought my gq with rear poly air air bags and then lifted it 3 inches so now i need some 3 inch spacers and tjm and arb dont staok any thick enough. they oly go to 50 mm so does any one have any ideas on where to buy some or have any other solutions to other materials that could be used. cheers
Posted: Mon Apr 06, 2009 2:17 pm
by chimpboy
It might not hurt to talk to the Air Bag Man -
http://www.airbagman.com.au/
Posted: Mon Apr 06, 2009 4:57 pm
by GUEEY
I had this very same problem when i put poly airs into my GU with a 3 inch lift.
They supplied to small poxy spacers that moved out of position everytime my spring flexed down.
I went to a plastic supplier and they machined up two 3 inch spacers out of poly ethelene and to the inside diameter of the coil, the poly airs sat nicely on the top.
I had a 10mm clearence hole drilled through the spacers, then i counter boared down the dept of the bolt head then i droped a 3.5 inch bolt through and bolted them down through the hole in the bottem spring retainer
Was a cheap and perfect fix.
Grant.