Outer Limits 4x4 Board

Posted: **Mon Apr 06, 2009 4:19 pm**

Hello all,

Looking at putting a lokka difflock into the front of a GQ. Was wondering if there are any special tools required other than your standard spanners etc.

Cheers Ian

Posted: **Mon Apr 06, 2009 5:21 pm**

Torque wrench.

Al.

Posted: **Mon Apr 06, 2009 10:32 pm**

A wheel bearing spanner/socket.

Depending if you have the 52mm nut (GQ I think) or the round nut with two holes in it (GU).

Dial guage to compare backlash before and after is useful but not entirely essential.

Posted: **Tue Apr 07, 2009 7:20 am**

thanx

Posted: **Wed Apr 08, 2009 5:49 pm**

At least 1 & preferably 2 sets of feeler guages.

Outer Limits 4x4 Board

LOKKA DIY INSTALLATION

LOKKA DIY INSTALLATION