Page 1 of 1
cheap gauges
Posted: Thu Apr 09, 2009 2:33 pm
by brendan_h
im looking into getting an oil temp gauge. but first i just want to see what the oil runs out and then i will decide if i want to get a gauge. so i was just looking on ebay and found a cheap oil temp gauge. what do you think just for a tempree setup?
http://cgi.ebay.com.au/52mm-Smoke-Face- ... 240%3A1318
Posted: Thu Apr 09, 2009 3:00 pm
by cooki_monsta
should be fine, isnt the most accurate brand of gauges in the world but i have 3 from that store, and they are good enough for me
Posted: Thu Apr 09, 2009 3:03 pm
by tweak'e
the smoke series are ok for cheapies. not sure about the oil one, the biggest thing will be the sensor and how to fit it.
they look a bit werid and the change in back lighting when you have your lights on i still have to work on. as standard it doesn't change brightness much.
boost and egt.
Posted: Thu Apr 09, 2009 3:29 pm
by brendan_h
its only going be in for a few weeks or whatever.
my plan was to drop the sump (may be leaking on the gasket too) and silversolder a the approprient brass socket on the bottom of the sump or on the upper bit of the sump
