Page 1 of 1
60 series vent question - who can shed some light?
Posted: Thu Apr 09, 2009 10:31 pm
by Pyrotech
ok, i am doing up my 60 as some of u know.
now my question is,
i have noticed on the imports that they have a vent just behind the the wheel arch, i was just wondering what they are for?
and where the vent goes too..
-Pyro
A
Posted: Fri Apr 10, 2009 7:50 pm
by Wozza244
Its designed to air out the guard cause of water sitting in there creates rust mate.
Posted: Sat Apr 11, 2009 11:33 am
by bj on roids
Have you got a picture of it?
Posted: Sat Apr 11, 2009 8:44 pm
by Pyrotech
Posted: Sun Apr 12, 2009 8:20 am
by Sixty's Guy
Those 60's in the pictures aren't imports, they're US 60's. The vent is for a fan that blows cool air onto the carby if it gets too hot. I don't know why the OZ spec never got it.
Posted: Sun Apr 12, 2009 9:24 am
by bj on roids
Sixty's Guy wrote:Those 60's in the pictures aren't imports, they're US 60's. The vent is for a fan that blows cool air onto the carby if it gets too hot. I don't know why the OZ spec never got it.
All three are US, no floating rear axle. Carby fan.
Posted: Sun Apr 12, 2009 9:27 am
by joel HJ60
Sixty's Guy wrote:Those 60's in the pictures aren't imports, they're US 60's. The vent is for a fan that blows cool air onto the carby if it gets too hot. I don't know why the OZ spec never got it.
Bingo.
