Page 1 of 1

F50

Posted: Sat Apr 11, 2009 8:39 pm
by D3V1L
Hey guys, picked up myself a f50 for my new buggy projct

one problem i need to sort is the transfer case.. high range is blown due to wheel stands

are these transfer cases divorced? so i can use the tc out of the range rover i have

the plan i have is to convert it to coil suspension, using the rangie diffs and hopefully the rangie transfer case.

im attempting to acheive something similar to scat attack but not quite to their level..ahahaha

any other info i can find out about these would be great as i have no idea yet and is a big learning curve for me

or does anybody have a transfer case to suit that i can buy off?

cheers
dave

Re: F50

Posted: Sat Apr 11, 2009 9:54 pm
by RockyF75
D3V1L wrote:Hey guys, picked up myself a f50 for my new buggy projct

.....

are these transfer cases divorced?

Go outside and have a look :idea: :?


But I don't think so.

Posted: Sat Apr 11, 2009 10:17 pm
by D3V1L
for me to go have a look i have to drive over an hour to get to....

thought i would try getting some info off ppl before i go down there and start tearing it apart

Posted: Sun Apr 12, 2009 6:47 am
by steve_f20
They dont have a divorced case, but the Rocky transmission is basically the same so you may be able to use the transfer from one of those. If not I believe that a whole Rocky gearbox and transfer case can be bolted straight up to the bellhousing on the F50 engine.

Posted: Sun Apr 12, 2009 11:48 am
by D3V1L
im gonna have to go have a look at it all i think, because its got a nissan 300zx engine in it.(VG30), and i didnt really look too close at how the conversion was done.

thanks for the info mate

dave

Posted: Sat Apr 25, 2009 11:20 pm
by D3V1L
hey guys getting very desperate to find a transfer case for my f50, does anybody know where there is one? or one off a rocky that will bolt on? im itching to get this baby back out there and im just failing when it comes to finding a replacement transfer case


dave