Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

engineering

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 11
Joined: Fri Apr 10, 2009 3:50 pm
Location: Cessnock

engineering

Post by jimy4b »

hey guys anyone know of a cheep engineer in the newcastle area? roughly wat would i be lookin at to get my zuk engineered?$$$$ :P
Top
Posts: 137
Joined: Sat Dec 15, 2007 4:29 pm
Location: newy

Re: engineering

Post by wardy1 »

jimy4b wrote:hey guys anyone know of a cheep engineer in the newcastle area? roughly wat would i be lookin at to get my zuk engineered?$$$$ :P
Athol at cardiff
???????;73124 wrote:They all beat me to it, use Athol it's worth the drive. He normally charges $350 for the first thing to be engineered (this can be a whole group, like everything combined to be a SAS) then $40 per each new item on the report after that.
QUOTE: from another board.
Top
Posts: 355
Joined: Fri Jan 09, 2009 2:17 pm
Location: Maitland, where the best are built

Post by 31zook »

Athol is a good bloke, he charged me $200 for the first item then $50 for every thing after that... Do you want his details?

Josh
This is where it's at...
http://auszookers.com/index.php

[url=http://auszookers.com/index.php?name=Forums&file=viewtopic&t=5220]The Big Dumb LWB[/url]
Top
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

Post by Turbo Tonka »

my old man used athol also,a few hour drive from tamworth but for $180 then $40 a item after that its well worth it.Seems like a good bloke to go through and alot cheaper then my report :oops:
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Top
Posts: 11
Joined: Fri Apr 10, 2009 3:50 pm
Location: Cessnock

Post by jimy4b »

hey thanks guys seems like athol is the go. can i get the details of his work shop please?
cheers
Andrew
Top
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Contact:
Contact jimbo jones

Post by jimbo jones »

jimy4b wrote:hey thanks guys seems like athol is the go. can i get the details of his work shop please?
cheers
Andrew
can some one pm me to with his details please

jimbo
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Top
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

Google told me this...

Athol Mullen
Mullen Automotive Engineering

24 Newcastle St CARDIFF NSW 2285
Ph/Fax (02) 4956 8030, Mob. 0414 685537
Top
User avatar
NIK
Posts: 974
Joined: Wed Aug 13, 2003 12:13 pm
Location: Newcastle

Post by NIK »

there is one in garden suburbs....all I,ll say is its nearly a year since he looked at my zuk and many many phone calls to him with "its being printed" to "Ive lost it" to "Its nearly ready" to "what car did you have agian" to "I,ll ring u back whats your number"
But spoke to Athol and he was very helpful even though the work was already done (original engineer let me down after aproving it) gave me a very reasonable quote and said upon siting if he was satisfied he would write the certificate on the spot.
Heard many good thing about him should of gone ther first lol
Nik
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest