ok got close but not perfect, i need to light in the rocker switch to light up properly when the spotties are on, atm i can only get it to light up a dull light which means it aint 100% correct. oh, ive tested the light on rocker when pluged another way the light is bright so it does work.
this is what i did
30-spotties
87-battery
86- battery
85- +plug on rocker switch
rocker switch:
ground- tap to hight beam
+- 85 plug on relay
acc- (nothing)
can someone pls give me something that they ACTUALLY USED AND KNOW WORKS and not something they've found on the net and hope to oneday use. ive already tried something someone else has told me and did not work not even close.
cheers
PS. why isnt any spottie wiring in the sticky bible? its usefull so most as most have spotties and it isnt straight forward for suzukis as they are negatiivly wired.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
wiring up spotties with light up rocker switch
wiring up spotties with light up rocker switch
1993 LWB vitara, Front & Rear alloy bars, towbar, spotties, UHF.
high beam - switch then back to relay 86
battery + - relay 30
earth - relay 85
spotties - relay 87 should be 2 pins
make sure the switch is earthed aswell. Also the switch power in has to go to the right pin on the switch other wise the light will stay on all the time
im pretty sure that will work been a little while since ive done spotties with a light in the switch
cheers jesse
battery + - relay 30
earth - relay 85
spotties - relay 87 should be 2 pins
make sure the switch is earthed aswell. Also the switch power in has to go to the right pin on the switch other wise the light will stay on all the time
im pretty sure that will work been a little while since ive done spotties with a light in the switch
cheers jesse
zookster666 wrote:high beam - switch then back to relay 86
battery + - relay 30
earth - relay 85
spotties - relay 87 should be 2 pins
make sure the switch is earthed aswell. Also the switch power in has to go to the right pin on the switch other wise the light will stay on all the time
im pretty sure that will work been a little while since ive done spotties with a light in the switch
cheers jesse
THAT WONT WORK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
PLS DONT REPLY WITH WHAT U THINK MIGHT WORK AS STATED IN THREAD. honest jesse thats for the reply but if its wired up that way the spotties will be on all the time except when the high beams are turned on coz the trigger 86 has power constantly until highs are turned on, then it earths out when high beam go on.
1993 LWB vitara, Front & Rear alloy bars, towbar, spotties, UHF.
Locked. Use THIS post in Auto Electrical.
Who is online
Users browsing this forum: No registered users and 2 guests