Page 1 of 1

2.8 GU gear box

Posted: Tue Apr 14, 2009 8:51 pm
by SHANE055
I was wondering if anyone knows if I can take a lower ratioed set of gears out of another Patrol gearbox and replace the ones in the box of my 2.8TD Patrol instead of changing the diff ratios

Posted: Tue Apr 14, 2009 9:05 pm
by nastytroll
they use the same transfer case gears as the others, so rockhopper and gearmaster transfer gear sets will fit. This is low range only though.

2.8 should already have 4.625 ratio diff.

kuf

Posted: Tue Apr 14, 2009 10:35 pm
by SHANE055
I want to run a lower ratio in all gears all the time because I've been told the 2.8 won't like larger tyres I know I can go to a 4.88 in the diffs but I'm just trying to see if theres an easier/cheaper way so I still have the options of diff gears or transfer gears to reduce it further later

Re: kuf

Posted: Tue Apr 14, 2009 11:12 pm
by bogged
SHANE055 wrote:I want to run a lower ratio in all gears all the time because I've been told the 2.8 won't like larger tyres I know I can go to a 4.88 in the diffs but I'm just trying to see if theres an easier/cheaper way so I still have the options of diff gears or transfer gears to reduce it further later
I honestly dont think ripping a box apart and praying you get a decent set of ratios would be cheaper than going 4.8's. specially if you get it wrong and have to do it 3 times.

YMMV.

ouh

Posted: Wed Apr 15, 2009 12:08 pm
by SHANE055
Thats why I'm trying to work out if its feasable or not

Posted: Wed Apr 15, 2009 2:54 pm
by NutterGQ
the 2.8 has shorter gearing than the RB30 box which interchanges but wont help. aftermarket gears are around $4800.00 plus fitting, i would go the diffs.

fu

Posted: Wed Apr 15, 2009 6:25 pm
by SHANE055
Diffs it is than thanks mate