Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

approved rear disks - 45

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 182
Joined: Wed Jul 28, 2004 9:26 am
Location: Noosa, Qld

approved rear disks - 45

Post by aussie_stu »

guys, done a lot of searching and have come up with a few bits and pieces, now this is for those who have had there rear discs on a 40 cruiser approved by transport. The 2 ways I've seen it done that appeal to me is

1 Hilux front solid rotors and calipers
2 40 series front vented rotors and calipers

I have the handbrake on the transfer case, so don't wanna worry about that, but having hard time with the "approved inspactors" as to whether there is a pro/con with thesae 2 swaps, read on ih8mud that a guy inQld was told he couldn't fit vented rotors to the back, but can't see why?

so anyone who has had a system approved by Qld Transport - what parts have you used and were there any problems??
Is it beer o'clock yet??
Top
Posts: 182
Joined: Wed Jul 28, 2004 9:26 am
Location: Noosa, Qld

Post by aussie_stu »

another thing, has anyone done the cut down fj60 swivel hub method and had it passed?
Is it beer o'clock yet??
Top
User avatar
TWISTY
Twisted by Design
Posts: 2607
Joined: Tue Jul 15, 2003 12:52 pm
Location: Sunshine Coast QLD

Contact:
Contact TWISTY

Post by TWISTY »

aussie_stu wrote:another thing, has anyone done the cut down fj60 swivel hub method and had it passed?
Haven't done it yet, but this is the way i was hoping to do it when ever i finally put a 60 series rear housing in mine. Havent looked into legalities but.

Edit:
Heres a link for anyone who might be interested.
http://www.employees.org/~dirttrak/rear ... ersion.htm
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
Top
Posts: 182
Joined: Wed Jul 28, 2004 9:26 am
Location: Noosa, Qld

Post by aussie_stu »

I'd be really interested in the legalities of that one too twisty, spoke to the boys @ eureka and it's $450 for the disc kit which has the studs, stud spacers, brackets and longer bolts in it (need to supply own calipers and rotors), but if the 60 swivel hub can be engineered it'd be a much cheaper way (esp since I might have some credit with the local wreckers :armsup: )
Is it beer o'clock yet??
Top
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm
Contact:
Contact STIKA

Post by STIKA »

It's a long time ago now , but i am fairly sure the 60 series front hubs just bolted on to the stub axel and i had a bracket made up the the caliper monuts to.
Supported By
Milanco
Phones N Alarms
Buds Customs
Top
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Post by vk7ybi »

Twisty, the linked method wont work on a 60 or late 40 housing as the backing plate pattern is different.. It needs to match the front spindle pattern to work.. This conversion is working beaut on my 40, but isnt engineered..
Top
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Post by vk7ybi »

STIKA wrote:It's a long time ago now , but i am fairly sure the 60 series front hubs just bolted on to the stub axel and i had a bracket made up the the caliper monuts to.
The front hubs will go on, but the hub body is shorter than a rear hub, so it wont bolt up..
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 99 guests