Page 1 of 1
guard cutting
Posted: Thu Apr 16, 2009 10:09 pm
by plopper
gday, im gettig 32 inch simex extreme trekkers for my 1994 sierra which has a 2 inch suspension lift and a 2 inch body lift, it looks like they'll fit but maybe someones had experience with 32 simex's, im removing the stock flares and inside lips but just wandering if you need to cut the guards cheers
Posted: Thu Apr 16, 2009 11:57 pm
by hillbilliywheelchair
Posted: Fri Apr 17, 2009 11:09 am
by Ridge
you may also need to push your front diff forward
Posted: Fri Apr 17, 2009 5:47 pm
by danssurf82
they should fit with 4" lift...
if not get the grinder out and start chopping..
with my vit to get 31's on it with a 2" suspension lift only. had to chop guards and get the 10pound sledge hammer onto the firewall...
fit beautifully now.. also had to adjust my steering limiters so it would not rub on full lock...
have fun with the grinder
Posted: Fri Apr 17, 2009 8:06 pm
by mrRocky
dont chop just bash with hammer
Posted: Fri Apr 17, 2009 8:48 pm
by plopper
thanks for all ya help guys really appreciate the help !!!
Posted: Sat Apr 18, 2009 7:35 am
by danssurf82
bash guards with hammer???
Posted: Sat Apr 18, 2009 12:25 pm
by mrRocky
theres something wrong if you cant fit 32"s with 4" of lift and some hammer work, i had 33"s simex's with 5" of lift no need to take gaurds off.
Posted: Sat Apr 18, 2009 6:04 pm
by 86slowsierra
Man i hate it when people on a thread start bragging about how good their car is, " i have 37's with no lift" blah, blah, blah. Having said that my car is on 32x 9's with only a 2" ome lift.
You will need to do some hammering but be careful of your pedal area, also bump stops will need fixing.