Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
fj60 5 speed in fj45
Moderators: toaddog, Elmo, DUDELUX
fj60 5 speed in fj45
hi found a 5 speed will it fit without much change i have a 73 fj45 with noisy 4 speed and 350 chev wondering whether to go 5 speed or put a turbo350 auto conversion
How easy/good the fit will be depends on the position of the existing motor/bellhousing. If the gbox mounting face (the rear of the bellhousing)is further forward than original by about 50mm, you may not have to cut the floor. You may also have to modify the removeable transmission hump or a later model may give you the required clearance. Tailshafts will probably need shortening/lenghtening.... gbox input may also need changing to match whatever clutch settup you have..
Show me the money..SHOW ME THE MONEY
Who is online
Users browsing this forum: No registered users and 1 guest