Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

nj pajero would 15 by 7inch sunraiser rims fit

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 4
Joined: Sat Apr 11, 2009 3:43 pm
Location: hampton park victoria

nj pajero would 15 by 7inch sunraiser rims fit

Post by shellybreeze »

would any one know if these rims would fit my nj thank you
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Most likely, yes. Three significant variables come to mind:

1. Hole pattern (no. of studs and PCD). If it's six stud, your chances are good.

2. Centre hole. Ideally, it should be a snug fit on the boss in the middle of your hub, but few people really care about this. As long as the hole fits over the boss, the wheel will fit.

3. Offset. This is how far the wheel mounting face is from the centreline of the wheel/tyre, and affects the track of the vehicle. NJ 15x7 factory alloys have a +10mm offset. Nissan Patrol rims have zero offset, so will increase track by 20mm. This is still legal. Some aftermarket rims have a -13mm offset, which will increase track by 46mm, and is illegal (AFAIK.) LandCruiser rims have about -22mm offset, and increase track even more.

Depending on which version of NJ you have eg GL, GLS, Exceed etc the different versions of rim may or may not cause tyres to protrude beyond guards, and possibly rub.
Posts: 4
Joined: Sat Apr 11, 2009 3:43 pm
Location: hampton park victoria

thank you scott for your knowledge and assistance

Post by shellybreeze »

thank you :)
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests