Page 1 of 1
Catch Can will need one intercooling an 80
Posted: Sun Apr 19, 2009 6:04 pm
by 4runner2.8
Hey guys
Will i need a catch can when i intercool my 1hz 80 with after market turbo setup?
Cheers Dan
Posted: Sun Apr 19, 2009 6:13 pm
by Willy Hilux
I would put one on otherwise you will clog up your intercooler.
Posted: Sun Apr 19, 2009 6:57 pm
by yamaha__308
Does it have blowby? If so, then use a catch can.
Posted: Sun Apr 19, 2009 7:37 pm
by +dj_hansen+
If you go about fitting a catch can, make sure all fittings/air lines are
atleast the same dia as the factory fittings to minimise any chance of further pressuring the system.
There was an autospeed article about making a catch can, here are a few pics borrow from lcool aswell
In the above setup, the vent hose travels slightly uphill into the bottom of the canister, and the vapour hits that drilled plate above which the scourers sit, by design this is self draining back into the tappet cover as the oil condenses and drips back down the hose via gravity.
There is also a hose coming out the top as a air vent/breather.
Posted: Tue Apr 21, 2009 7:36 pm
by beinthemud
Willy Hilux wrote:I would put one on otherwise you will clog up your intercooler.
Does it have blowby?
its a diesel
I would put one on otherwise you will clog up your intercooler. even if u do id be more worried about it getting back to your engine
Posted: Tue Apr 21, 2009 7:57 pm
by yamaha__308
+dj_hansen+ wrote:
.
Nice design, thanks dj
Posted: Tue Apr 21, 2009 9:34 pm
by Z()LTAN
yeah i like it alot.
Over engineered just the way i like it.
Posted: Wed Apr 22, 2009 7:59 am
by +dj_hansen+