Page 1 of 1
chev or ford v8 for a 40
Posted: Mon Apr 20, 2009 3:45 pm
by hixi126
im looking to start a buildup of a 40 which will either be a ford or chev v8 onto a late 60 series gbox&transfer to late 60 series diffs.
i am no expert when it comes to v8's so thats why im asking .
looking at either a cleavlend 351 or a 350 chev? which engine is more suitable for low down torque , and hp?
please if there is another topic covering this question can you please point it out to me rather than giving me greaf
cheers hixi
Posted: Mon Apr 20, 2009 3:57 pm
by Jacked
GM Performance 502
I would go the chev. Everone does it making it cheaper and easier for you. Power and torque all comes down to what varient of the engine you use and what cam etc.
Ford guys are going to say Ford and GM going to say GM.
I would say spares for chev are more plentiful.
Posted: Mon Apr 20, 2009 6:55 pm
by RED60
Probably comes down to what you get cheapest. I've had a bit to do with both types and they're almost equal in reality. The chev will end up being physically smaller and slightly lighter...
Posted: Mon Apr 20, 2009 8:51 pm
by roblrc
Hixi, more chev engine performance bits about, and they are a bit lighter and narrower than the cleveland. I would consider the windsor over the cleveland as they rev better.
Posted: Mon Apr 20, 2009 9:00 pm
by CRUSHU
Depends on the power you are expecting to make.
chev engines are more expensive than a clevo, to buy.
Chev's need performance heads, dissy's, etc, where Clevo heads and factory electronic dissy is good for over 400hp, with good torque.
Chev aftermarket heads are dearer than a set of ported 2V heads, with 4V valves, with roller rockers.
400hp or less, the clevo is a clear winner. Dissy is at the front, for ease of use, and for firewall clearance. It can be sealed for water/mud ingress.
Posted: Mon Apr 20, 2009 9:35 pm
by _Mitcho_
go with a chev you wont look back unless you can get a 460!!
Posted: Mon Apr 20, 2009 10:46 pm
by jessie928
chev it,
a better engine for a 4wd for a start with the dizzy at the back.
you will have no firewall clearance issues with a chev in a 40.
SBC is a smaller engine than a clevo and lighter.
Jes
Posted: Tue Apr 21, 2009 12:28 am
by fj45304
chev it m8 i got a 350 with 4 speed putting a turbo 350 auto goes great
Posted: Tue Apr 21, 2009 7:54 am
by croozy
I'm a mopar man but I put a chev in mine instead of a ford or chrysler engine simply because of it's smaller physical size & availability to get parts at the right price.
Posted: Tue Apr 21, 2009 9:04 am
by dreama
put a chev in i have one for sale stage 4 350 chev and turbo 350 box
Posted: Tue Apr 21, 2009 4:35 pm
by hixi126
what dollars for the engine $$
Posted: Tue Apr 21, 2009 5:09 pm
by MUD000
I have a 6ltr that would be sweet in there
Not for sale thou
Go Hixi
Cheers Dan