Page 1 of 1
15" rims on 80 series?
Posted: Thu Apr 30, 2009 6:02 pm
by TUFFAS
hey just asking if 15" rims will fit on a 96 gxl 80 series?
cheers brad,
Posted: Thu Apr 30, 2009 7:52 pm
by Toyo80
No they will not, unless of course you are handy with a grinder. The earlier Fj80's etc 1990-92 will fit 15's no problem.
Any reason for wanting to fit 15's?
Posted: Fri May 01, 2009 7:09 pm
by udm
if you got big offset rims, they will fit the front with no mods, but on the back you will have to grind the calipers just a little.
Posted: Sat May 02, 2009 9:57 am
by 60_series_united
Toyo80 wrote:No they will not, unless of course you are handy with a grinder. The earlier Fj80's etc 1990-92 will fit 15's no problem.
Any reason for wanting to fit 15's?
i have 15"s on my 92 they fit fine. what has changed in the later models?
Posted: Sat May 02, 2009 10:11 am
by udm
60_series_united wrote:Toyo80 wrote:No they will not, unless of course you are handy with a grinder. The earlier Fj80's etc 1990-92 will fit 15's no problem.
Any reason for wanting to fit 15's?
i have 15"s on my 92 they fit fine. what has changed in the later models?
post 93 have bigger rotors, etc
Posted: Tue May 05, 2009 1:51 pm
by mada1234
You can use/fit the brakes from the earlier 80's, only a bolt on job. then you will be able to run 15'' rims on the rear.
I hit this problem when i tried to use my rims from my old 80 series, they scraped on the rear calipers.
Posted: Tue May 05, 2009 2:11 pm
by RV80
mada1234 wrote:You can use/fit the brakes from the earlier 80's, only a bolt on job. then you will be able to run 15'' rims on the rear.
I hit this problem when i tried to use my rims from my old 80 series, they scraped on the rear calipers.
I dont know why you would want to put on smaller brakes
Posted: Tue May 05, 2009 3:17 pm
by Hekta
I know guys that have ground a small amount off their calipers to fit 15" rims on their 80s'. I'm unsure of the year models though.
Posted: Tue May 05, 2009 5:58 pm
by +dj_hansen+
So far the only safe and legal option here is fitting the early model rear calipers and back plates.
Grinding calipers is a big no no, consider what you are fiddling with!
Posted: Tue May 05, 2009 8:31 pm
by Ice
late 92 had the 1fz motor update this is where the brakes changed over and 16 inch rims